A5 size
148 × 210 mm
1,748 × 2,480 pixels at 300 DPI
A5 is half of A4, the size you get by folding an A4 sheet in half. It is a common size for flyers and booklets. It is used for flyers, leaflets, booklets and notebooks.
A5 in pixels
| Resolution | Pixels | Typical use |
|---|---|---|
| 72 DPI | 420 × 595 | Screens and digital previews |
| 150 DPI | 874 × 1,240 | Large prints viewed from a distance |
| 300 DPI | 1,748 × 2,480 | Standard for print viewed up close |
| 600 DPI | 3,496 × 4,961 | Fine line art and small text |
| 300 DPI + bleed | 1,819 × 2,551 | Print file with 3 mm bleed on every side |
Pixels = inches × DPI, rounded to the nearest pixel (1 inch = 25.4 mm). Portrait orientation; swap the numbers for landscape.
A5 dimensions
- Millimetres
- 148 × 210 mm
- Centimetres
- 14.8 × 21 cm
- Inches
- 5.83 × 8.27 in
- Aspect ratio
- 1:√2 (about 1:1.414)
- With 3 mm bleed
- 154 × 216 mm
Bleed and safe area
If your design runs to the edge of the page, add a bleed of 3 mm on every side so a slightly off cut doesn’t leave a white sliver. Keep text and logos at least 3–5 mm inside the trim edge (the safe area). These are common printer guidelines rather than a standard, so check your printer’s spec before sending files.
Resize an image to A5
Frequently asked questions
How many pixels is A5 at 300 DPI?+
1,748 × 2,480 pixels. With a 3 mm bleed on every side it is 1,819 × 2,551 pixels.
What size is A5 in inches?+
A5 is 148 × 210 mm, which is 5.83 × 8.27 in (14.8 × 21 cm).
What DPI should I use?+
300 DPI is the usual standard for anything printed and viewed up close. Large posters viewed from a distance are often printed at 150 DPI. 72 DPI is only for screens. If in doubt, ask your printer.
What is bleed and do I need it?+
Bleed is extra artwork beyond the trim edge, so nothing white shows if the cut is slightly off. If your design runs to the edge, extend it by 3 mm on every side, making the file 154 × 216 mm. Printers vary, so check their spec.
Getting proofs approved?
Send customers a proof link. They click the exact spot that needs a change, and you get a clear approval before anything is printed.
See proof approval